Sunday, February 19, 2017

The Fab Four Scroll Saw Portrait Pattern.

http://www.stevedgood.com/estore/estore.html
I was on a portrait pattern kick yesterday so I just kept going today. This pattern of a young Fab four is over 16 inches wide. The pattern is split into four pages. You will print and reassemble the pattern before you apply it to the board.

I used 1/4" Baltic birch plywood for the portrait and 1/4" thick cheap ply for the backer board that is painted black. Both boards are 16.75" X 13.5". I made a custom frame and painted it black also.

If you have not cut portrait style pattern before here are a couple of tips. The size of this pattern makes it much easier to cut with spiral blades. I cut most of this pattern with a #3 spiral. I used a #5 for the large interior cuts just to speed thing up a little. If you need a source for spiral blades check out our monthly giveaway sponsor, Bear Woods.

When you get ready to cut this portrait plan ahead. Save the largest interior cut until last. If you cut them early the strength of the board suffers and can make it more difficult to handle.

If this will be your first time using spiral blades make sure you practice on scrap wood first. Enven if you occasionally use spirals you should warm up for a few minutes before you start cutting on the final piece.

Remember that the pattern lines can be altered on the fly. If you come to a place and think that the cut is too difficult then cheat the line until you are confident in the cut. The lines in this pattern are just representations of the contrast between the highlights and shadows of the original image. If you wander off the line a little don't panic. No one will notice in the final piece.

I enjoyed the two portrait patterns I posted this weekend. I was able to practice a new design style and using spiral blades that I rarely ever use. That's enough of a good thing though. Because I am not that proficient with spiral blades the Beatles portrait took me a few hours to cut. Because I was not as comfortable with the spirals I built up tension in my body. My neck and back hurts. When I am cutting relaxed I can cut for hours with no discomfort.

There is a good lesson here. Any time you feel pain try to analyze the reason. If you are not normally prone to pain then you are probably using poor technique at the saw. Watch your posture. No hunching over the table. Make sure the seat is at the proper height. Use good light and take frequent breaks.

Watch for signs of tension in your body. Are you grinding your teeth or holding your breath? Do your neck muscles feel tight? Do you have a death grip on the wood? All of these can be signs that you need to relax. Take a break then come back and figure out what was causing the tension. Eliminate any physical stress you can or you will end up feeling the results. Prolonged physical can cause permanent damage and end your hobby. Take it serious.
_______________

_______________

_______________
Don't forget to visit my blog and submit your daily entry to win the $75 Bear Woods sponsored gift certificate. Remember that you can no longer enter the contest directly from the email newsletter. Please visit my blog and look for the Gift certificate. Click it to enter.

_______________

Information:
Most of you read my blog through the email newsletter. A reminder that the newsletter is just a copy of the daily blog post. Those posts stay on the blog forever. Every post since 2007 is still there. If you misplace a newsletter or lose the daily pattern you can go to my blog and it will be there. The patterns are archived in the free online catalog. 

The posts are in a journal format. The last two posts stay on the front page. When a new post goes up the third goes to the next page. At the bottom of the second post is a widget that lets you go back to the previous posts. 

In the left hand column of the blog is an archive list. If you know the date you can just select it there. 

Even more helpful is the blog list. I maintain a page that shows the title and a few key words for every post. You can find the list at this link. http://www.stevedgood.com/sswslist.html.

I always have trouble keeping up with email. Some days I can get over 100 emails. In an effort to reduce the overload I will probably not answer email that ask if I can send the newsletter again. I don't have control of the newsletter delivery. That is done by Google automatically when I upload a post to the blog. I won't resend the daily pattern because it is in the catalog. Thanks for understanding.


- -


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

You can view a video showing use of the DVD on a Windows PC and a MAC at this link

Click here to Order. 
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

Ad Affiliate

Wooden Bowls from the Scroll Saw


While wood bowls are commonly made on a lathe, this guided resource offers 28 projects for crafting beautiful bowls with the more accessible scroll saw. You will not believe these bowls were made without a lathe!

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts