Sunday, January 8, 2012

Five dollar board into a keepsake basket.. Step by step.




For this project I purchased a 1/2 x 6 x 36 inch craft board from Lowes. It's a nice clear pine and it will make one basket for only five bucks.

I cut the board into 6 inch blanks. The pattern was cut and is ready to be applied to the boards.

I prepped all the blanks with blue painters tape. The tape makes the pattern easy to remove and also helps lubricate the blade. The small amount of lubrication helps prevent burning and also increases the life of the blade. I applied the patterns with spray adhesive over the blue tape.

Over at the drill press I drill all the entry holes. I use a 1/8" drill bit.

I cut the top and bottom parts first. I'm using a Flying Dutchman #3 scroll reverse blade.

Then all four rings were cut out. I like doing similar pieces one after the other because I can get a solid technique and stay consistent.

Now all the parts have been cut and sanded. I like to ease the edges of the top and bottom. You need to be careful with the rings while sanding. They are delicate.

It's time to start gluing and stacking the rings. Apply glue to the first ring and center it on the bottom.

Give the glue a few minutes to dry so the ring does not slide around while applying the next ring.

To achieve a basket weave pattern you need to alternate the rings as shown in the photo above.

Continue to glue and stack the rings. Only apply glue to the contact points of the rings. You don't want the exposed parts to be covered with glue.


The pattern has four rings. You can obviously make the basket taller by cutting more rings.

Apply glue to the top of the last ring and center the top. Take your time to make sure everything is centered and lines up well.

I apply a heavy weight to the basket and allow the glue to dry. I finish the basket with a bath in lemon oil. Once it dries I use spray acrylic to protect the wood and add a little sheen.



The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts